Konica Minolta 250 Copier User Manual


 
20
4. Features and Functions
5
Convenient Copy Functions
Multi-Job Function Chart
2) 2)
2) 2)
2)
Multi-Job Function
When the optional Hard Disk HD-504 is installed, the Multi-Job Function allows users to scan a document while the bizhub
350 / 250 is printing or queue up to 5 spooled jobs from client PCs while scanning.
1) 1)
1) 1)
1)
Fast Copy / Quick Warm-up Time
The bizhub 350 / 250 features a warm-up time of 14 seconds after turning on auxiliary power, a first copy output time of 4.8
seconds (5.3 for the bizhub 250) and copying at 35 cpm (25 cpm for the bizhub 250).
3) 3)
3) 3)
3)
Simitri Toner
Konica Minolta's unique polymerised toner produces consistent, high-quality images with improved reproduction of text
and fine lines. This is due to the small diameter of each particle and the improved uniformity, which offers high coverage
accuracy and minimises the space between particles. Since Simitri Toner affixes using a lower temperature, there is minimal
paper curl due to heat. This toner is also earth friendly, minimising environmental burden during manufacture and requiring
less energy for fixing.
4)4)
4)4)
4)
Sorting without a Finisher
Sorting: Each set of copies is fed out in an alternating crisscross pattern to
separate them.
Grouping:The copies of each page are fed out in an alternating crisscross
pattern to separate them.
Crisscross Sorting
1
1
1
4
3
2
1
4
3
2
1
1
1
1
Crisscross Grouping
Printing a Proof Copy
Before a large copy run, pressing the Copy Proof button on the control
panel prints out 1 set, letting users check copying and finishing settings.
The copy run can then proceed without modification or, if needed,
changes can be made to the appropriate settings.
JOB 1
JOB 1
JOB 2
JOB 3
JOB 4
JOB 5
JOB 2
JOB 3
JOB 4
JOB 5
Input
Output
Copy time with Multi-Job
Time saved
Copy tim
e without M
ulti-Job
5)5)
5)5)
5)
Assorted Copy Functions