Filter
Top Products
Working with the Status Display20
Working with the Status Display
Introduction
The Status Display shows information about the current status of the printer
(and its supplies) and allows you to specify various settings such as the time
until the printer enters Energy Saver mode.
Opening the Status Display and Showing the Supplies
Status
Use one of the following steps to open the Status Display:
#
Windows XP/Server 2003
—From the
Start
menu, choose
All Pro-
grams
, then
KONICA MINOLTA magicolor
2500W Utilities
, and then
KONICA MINOLTA magicolor 2500W Status
.
#
Windows 2000/Me/98SE
—From the
Start
menu, choose
Programs
,
then
KONICA MINOLTA magicolor 2500W Utilities
, and then
KONICA MINOLTA magicolor 2500W Status
.
Altering the Size of the Status Display Window
#
From the
Display
menu, choose
Status (Reduce)
to decrease the size of
the window.
#
From the
Display
menu, choose
Status (Expand)
to increase the size of
the window.
Using the Status Display
#
When the background of the printer graphic is green, the printer is in
standby mode or a job is printing normally.
#
When the background of the printer graphic is red or yellow, there is an
error and the job has been interrupted. The status of the printer and the
error message are shown in the dialog boxes on the left.
The function areas include:
#
Printer Status
—Displays text messages that describe the current opera-
tional status of the printer.
#
How to Recover
—Provides you with explanations of what you need to do
in order to correct problems and recover from error conditions.
#
Warning Status
—Displays text messages that alert you of conditions
such as low toner.