Filter
Top Products
Media Types
27
Envelopes
Print on the front (address) side only. Some parts of the envelope consist of
three layers of paper—the front, back, and flap. Anything printed in these lay-
ered regions may be lost or faded.
Use envelopes that are
#
Common office envelopes approved for laser printing with diagonal joints,
sharp folds and edges, and ordinary gummed flaps
!"
Because the envelopes pass through heated rollers, the gummed
area on the flaps may seal. Using envelopes with emulsion-based
glue avoids this problem.
#
Approved for laser printing
#
Dry
DO NOT use envelopes that have
#
Sticky flaps
#
Tape seals, metal clasps, paper clips, fasteners, or peel-off strips for seal-
ing
#
Transparent windows
#
Too rough of a surface
#
Material that will melt, vaporize, offset, discolor, or emit dangerous fumes
#
Been presealed
Capacity Tray 1
Up to 10 envelopes, depending on their
thickness
Orientation
Face up
Driver
Media Type
Envelope
Weight
60 to 163 g/m² (16 to 43 lb bond)