Filter
Top Products
2
Setup items by operation
2-110 bizhub C203/C253/C353
Item Definition Prior confirmation
SNMP Specifies whether to use the SNMP. If yes, specify whether
to use SNMP v1/v2 (IP), SNMP v3, and SNMP v1 (IPX).
SNMP v1 (IPX) can be specified only when IPX is enabled.
Protocol to be used
(TCP/IP or IPX/SPX)
UDP Port Setting Default setting: 161
Specify the UDP port number.
SNMP v1/v2c Setting Specify settings for using SNMP v1/v2c.
Read Community Name Specify the community name to be used for scanning (up to
15 characters).
Write Community Name Specify the community name to be used for reading and
writing (up to 15 characters).
SNMP v3 Setting Specify settings for SNMP v3.
Context Name Specify the context name (up to 63 characters).
Discovery User Name Specify the user name for detection (up to 32 characters).
Read User Name Specify the name of read only user (up to 32 characters).
Security Level Specify the security level for read only user.
auth-password Specify the read only user authentication password to be
used for authentication (up to 32 characters).
priv-password Specify the read only user privacy password to be used for
privacy (encryption) (up to 32 characters).
Write User Name Specify the reading/writing user name (up to 32 characters).
Security Level Specify the security level for reading/writing user.
auth-password Specify the reading/writing user authentication password to
be used for authentication (up to 32 characters).
priv-password Specify the reading/writing user privacy password to be
used for privacy (encryption) (up to 32 characters).
Encryption Algorithm Specify the encryption algorithm.
Authentication Method Specify the authentication method.