Konica Minolta C30P All in One Printer User Manual


 
Media Types
99
" For custom sizes, use the printer driver to specify the settings within
the ranges shown in the above table.
Media Types
Before purchasing a large quantity of special media, do a trial print
with the same media and check the print quality.
Keep media on a flat, level surface in its original wrapper until it is time to
load it. For a list of approved media, refer to printer.konicaminolta.com.
Plain Paper (Recycled Paper)
Use media that is
Suitable for plain paper laser printers, such as standard or recycled office
paper.
Note
Do not use the media types listed below. These could cause poor print
quality, media misfeeds, or damage to the printer.
DO NOT use media that is
Coated with a processed surface (such as carbon paper, and colored
paper that has been treated)
Capacity Tray 1
(Manual Feed
Tray)
Up to 100 sheets, depending on the paper
weight.
Tray 2/3/4 Up to 500 sheets, depending on the paper
weight.
Orientation Tray 1
(Manual Feed
Tray)
Face down
Tray 2/3/4 Face up
Driver
Media Type
Plain Paper (Recycled)
Weight 60–90 g/m² (16–24 lb bond)
Duplexing See page 98 for supported sizes.
Glossy
Mode
ON/OFF Supported
" Glossy mode is Disabled at Grayscale (Color Mode), or
Duplex Print.