Konica Minolta Di1610p Printer User Manual


 
1.2 SAFETY INFORMATION
1
Di1610/Di1610p 1-7
Introduction Chapter 1
Precautions for Routine Use
Do not store toner units, PC drum units, and other supplies and consumables in a
place subject to direct sunlight and high temperature and humidity, as poor image
quality and malfunctions could result.
Do not attempt to replace the toner unit and PC drum unit in a place exposed to direct
sunlight. If the PC drum is exposed to intense light, poor image quality could result.
Do not unpack a toner unit or PC drum unit until it is to be used. Do not leave a unit
unpacked. Install it immediately, otherwise poor image quality could result.
Do not keep toner units and PC drum units in an upright position or upside down, as
poor image quality could result.
Do not throw or drop a toner unit or PC drum unit as poor image quality could result.
Do not use this product in an area where ammonia or other gases or chemicals are
present. Failure to do so may shorten the service life of the product, cause damage
to it or decrease its performance.
Do not use this product in an environment with a temperature outside the range
specified in the User Manual, as a breakdown or malfunction could result.
Do not attempt to feed stapled paper, carbon paper or aluminum foil through this
product, as a malfunction or fire could result.
Do not touch or scratch the surface of the toner unit developing roller and the PC drum,
as poor image quality could result.
Use the supplies and consumables recommended by the dealer. Use of any supply or
consumable not recommended could result in poor image quality and machine
breakdown.