Filter
Top Products
3
3.8 Loading Originals
3-26 Di1610/Di1610p
Before Making Copies Chapter 3
Positioning Highly Transparent Originals
When making a copy from OHP transparencies, translucent paper, or other highly
transparent original, position the original as detailed below.
1 Raise the Auto Document Feeder or Original Cover.
2 Place the original face down on
the Original Glass.
3 Position the original on the
Original Glass so that the corner of
the original aligns with the arrow in
the upper-left corner of the
Original Scales.
4 Place a blank sheet of paper of the
same size over the original.
5 Gently lower the Auto Document Feeder or Original Cover.
6 Specify the desired copy settings.
❍ “Making Copies” on page 4-1
7 Press the [Start] key to start the copy cycle.