Filter
Top Products
3.3 Parts Names and Their Functions
3
Di1610/Di1610p 3-5
Before Making Copies Chapter 3
Inside the Machine
3 Front Cover Open when replacing the Toner Cartridge or Drum Cartridge, or
clearing a paper misfeed. (p. 6-5)
4 Tray1 Holds up to 250 sheets of paper and easily adjusts to different paper
sizes.
Special paper can be used. (p.3-14)
5 Bypass Tray Use for manual feeding of paper.
Holds up to 10 sheets of paper.
Special paper can be used. (p.3-20)
6 Tray1 door If Legal-size paper is installed, open this door.
7 Copy Tray Holds copies fed out face down from the machine.
The Copy Tray can be adjusted to one of three angles. Adjust the Copy
Tray to the angle appropriate for its application. (p. 3-6)
8 Control Panel Use to start a copy cycle and make necessary settings. (p. 3-8)
9 Exposure Lamp This lamp irradiates the document when it is scanned. The time until the
exposure lamp goes off can be specified. For details on specifying the
setting, refer to “Selecting the “MACHINE SETTING” Menu” on
page 5-3.
10 Original Scales Use to align the original. (p. 3-24)
11 Power Switch Use to turn the machine on and off. (p. 3-10)
12 USB Port For details, refer to the User Manual for the printer controller.
13 Parallel Port For details, refer to the User Manual for the printer controller.
14 Fuser Cover Not used
No. Part Name Description
1
No. Part Name Description
1 Imaging Cartridge Generates the copy image.
The Imaging Cartridge is constructed of both the Drum Cartridge and
the Toner Cartridge set into place.