Filter
Top Products
6
6.3 Administrator Settings
6-8 Di2010/Di2510/Di3010/Di3510
Administrator Management Operations Chapter 6
✎
Note
If the entered administrator code is incorrect, the message “Incorrect code
and new administrator. Input administrator code.” appears. Type in the cor-
rect administrator code.
When the “Get Penalty” function is set to “ON”, incorrectly typing the admin-
istrator code is counted as an incorrect attempt to access the machine. After
three incorrect attempts, the Utility screen is displayed, access to Adminis-
trator mode is denied, and the administrator code (administrator password)
will not be accepted. To allow access to Administrator mode, turn the ma-
chine off, then on again.
5 Touch [New Code], and then use
the 10-Key Pad to type in the new
8-digit administrator code (Admin.
Password).
❍ Press the [C] key to erase all
entered text.
❍ To return to the previous
screen, touch [Cancel].
✎
Note
If the entered administrator code does not have 8 digits, the message “In-
correct code and new administrator. Input administrator code.” appears.
Type in an 8-digit administrator code.
6 Touch [Retype New Code], and
then use the 10-Key Pad to retype
the new 8-digit administrator code
(Admin. Password).
❍ Press the [C] key to erase all
entered text.
❍ To return to the previous
screen, touch [Cancel].
✎
Note
If the entered administrator code does not have 8 digits, the message “In-
correct code and new administrator. Input administrator code.” appears.
Type in an 8-digit administrator code.
7 Touch [Enter].