Filter
Top Products
6.6 Setting Machine Access
6
Di2010/Di2510/Di3010/Di3510 6-21
Administrator Management Operations Chapter 6
6.6 Setting Machine Access
Get Penalty
The “Get Penalty” function is used to specify whether (“On”) or not (“Off”) access to
Administrator mode, mailbox print jobs and user boxes is monitored.
If the “Get Penalty” function is set to “On”, the number of incorrect attempts to ac-
cess Administrator mode, mailbox print jobs and user boxes is counted. After three
incorrect attempts, access to the machine is denied. To allow Administrator mode
to be accessed again, turn the machine off, then on again. However, to allow mail-
box print jobs and user boxes to be accessed again, the penalty must be removed.
For more details, refer to the Printer Controller User Manual.
To make settings for the “Get Penalty” function
1 Follow the procedure described in “To display the Administrator Management
screens” on page 6-2 to display the Administrator Management screen.
2 Touch [Admin. 2], and then touch
[Get Penalty].
3 To use the “Get Penalty” function,
touch [ON]. To stop using the “Get
Penalty” function, touch [OFF].