Filter
Top Products
CAT5_OUT button
CAT5 output is selected.
Front Dip Switch
Please refer to "4-1. The setting of front dip switch."
SERIAL_3
DB9 connector for serial communication.
This connector is used to register commands into the product.
(Please refer to "5-2 Connection of RS232C cable.")
Front LED
Yellow LED : It does not light.
Green LED : It lights when command mode is ON.
Orange LED : It lights when SERIAL1&3 are transmitting or receiving.
Bottom dip switch
Option setting is available,etc...
(Please refer to "4-2. The setting of bottom dip switch.")