Filter
Top Products
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the PL-50 Power Controller - Monitor
10
5. Select the Internet Protocol (TCP/IP) and click the Properties button (see
Figure 6).
Figure 6: Local Area Connection Properties Window
6. Select Use the following IP address, and fill in the details as shown in
Figure 7.
7. Click OK.
Figure 7: Internet Protocol (TCP/IP) Properties Window
6.2.2 Connecting via a Straight-Through Cable
You can connect the ETHERNET of the PL-50 to the Ethernet port on a
network hub or network router, via a straight-through cable with RJ-45
connectors.