Kramer Electronics VP-720xl Laser Pointer User Manual


 
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Technical Specifications
42
9 Technical Specifications
Table 20 includes the technical specifications:
Table 20: Technical Specifications
1
of the Presentation Switchers / Scalers
INPUTS:
2 x CV 1 Vpp/75 on RCA connectors;
2 x Y/C (s-Video) 1 Vpp (Y), 0.3Vpp (C) / 75 on 4 pin connectors; 1 x Component
(Y, Pb/Cb, Pr/Cr) (both progressive and interlaced signals accepted) HDTV on RCA
connectors;
1 x VGA (VGA/SVGA/XGA/UXGA +HDTV on an HD15F connector (2 x VGA on the
VP-724xl); and 1x DVI-D connector.
For each video input there is a corresponding (unbalanced) audio stereo input on a
terminal block connector
MAX. OUTPUT LEVEL: AUDIO: 4.88Vpp
2
OUTPUTS: 2 x RGBHV (VGA) format on HD15 connectors; component HDTV on the same
HD15 connectors for 480p, 720p and 1080i (on the VP-724xl). One line-level stereo
audio on terminal blocks. One stereo loudspeakers output 2x5W (RMS) on terminal
blocks
OUTPUT
RESOLUTIONS:
VGA (640x480), SVGA (800x600), XGA (1024x768), SXGA (1280x1024), UXGA
(1600x1200), 1024x852, 1024x1024, 1366x768, 1365x1024, 1280x720, 720x483,
852x480, 1400x1050, 1280x768*, as well as a user definable output mode. Also
supports 480p, 720p, and 1080i (on the VP-724xl)
CONTROL: Front panel buttons / OSD, IR remote control, RS-232 on a DB-9 connector, Picture-
In-Picture (not available on the VP-719xl): Video in Graphics (or vice versa) in any
size and at any location, or Split Screen (2 images side-by-side)
ADDITIONAL
CONTROLS:
Freeze, zoom, different selectable vertical refresh rates, Video and Audio
ProcAmp control, output image scaling and aspect ratio change
POWER SOURCE: 100-240 VAC, 50/60 Hz, 30VA automatic power supply
DIMENSIONS: 19" (W), 9.3" (D) 1U (H) rack mountable
WEIGHT: 3 kg (6.6 lbs.) approx.
ACCESSORIES: Null modem adapter, IR remote control, power cord
3
1 Specifications are subject to change without notice
2 With maximum amplification (volume set to maximum), AUDIO IN maximum is 1.9Vpp, and the AUDIO OUT maximum
is 4.8Vpp
3 We recommend that you use only the power cord that is supplied with this machine