Filter
Top Products
Operating the VP-81KSi Locally via the Front Panel Buttons
19
Ethernet, if you are connected via an Ethernet cable. Enter the IP
address
1
or the machine name
The default IP address is 192.168.1.39 and the default name for the unit
is KRAMER_XXXX
2
Serial, if you are connected via a serial port. Select the COM port from
the Select Port drop-down list.
4. Click OK.
The Device Properties window appears.
Figure 13: Device Properties Window
5. Make the required changes.
6. Click Set to save changes, or click Close to exit and not save the changes.
7 Operating the VP-81KSi Locally via the Front Panel Buttons
Powering up the VP-81KSi recalls the previous settings (that is, the state of the
unit when it was powered down) from the non-volatile memory.
7.1 Using the Front Panel INPUT SELECTOR Buttons
Table 5 describes the input selector button illumination descriptions.
1 The default IP address is 192.168.1.39
2 The four digits are the last four digits of the machine’s serial number.