Filter
Top Products
VS-48HDCPxl – Contents
i
Contents
1 Introduction 1
2 Getting Started 2
2.1 Achieving the Best Performance 2
2.2 Safety Instructions 3
2.3 Recycling Kramer Products 3
3 Overview 4
3.1 Defining the VS-48HDCPxl 4x8 DVI Matrix Switcher 5
3.2 Using the IR Transmitter 8
4 Installing in a Rack 9
5 Connecting the VS-48HDCPxl 10
5.1 Connecting to the VS-48HDCPxl via RS-232 11
5.2 Operating via Ethernet 12
6 Operating the VS-48HDCPxl 4x8 DVI Matrix Switcher 16
6.1 Routing Inputs to Outputs 16
6.2 Disconnecting the Outputs 16
6.3 Storing and Recalling a Setup 16
6.4 Acquiring the EDID 18
6.5 Locking and Unlocking the Front Panel 20
6.6 Resetting the Ethernet Configuration to Default Values 20
6.7 Controlling Configuration via the Ethernet Port 20
6.8 Firmware Upgrade 20
7 Technical Specifications 21
8 Default Communication Parameters 22
9 Kramer Protocol 2000 23
Figures
Figure 1: VS-48HDCPxl 4x8 DVI Matrix Switcher Front Panel 6
Figure 2: VS-48HDCPxl 4x8 DVI Matrix Switcher Rear Panel 7
Figure 3: Connecting the VS-48HDCPxl 4x8 DVI Matrix Switcher 11
Figure 4: Local Area Connection Properties Window 13
Figure 5: Internet Protocol Version 4 Properties Window 14
Figure 6: Internet Protocol Version 6 Properties Window 14
Figure 7: Internet Protocol Properties Window 15
Figure 8: SELECTOR Buttons 17