Kramer Electronics VS-66FW Switch User Manual


 
Flash Memory Upgrade
19
Figure 14: RS-232 Window
6. Click Connect.
In the “ Atmel – Flip” window, in the Operations Flow column, the Run
button is active, and the name of the chip appears as the name of the third
column: T89C51RB2.
Verify that in the Buffer Information column, the “HEX File: VS_66FW_12.hex
appears.



Figure 15: Atmel – Flip Window (Connected)
7. Click Run.
After each stage in the operation is completed, the check-box for that stage
becomes colored green
1
.
When the operation is completed, all 4 check-boxes will be colored green and
the status bar message: Memory Verify Pass appears
2
:
1 See also the blue progress indicator on the status bar
2 If an error message: “Not Finished” shows, click Run again