Filter
Top Products
Contents
i
Contents
1 Introduction 1
2 Getting Started 1
2.1 Quick Start 2
3 Overview 3
3.1 About HDCP 3
3.2 Recommendations for Best Performance 4
4 Your VS-66HDCP 4
4.1 Using the IR Transmitter 7
5 Installing the VS-66HDCP in a Rack 8
6 Connecting the VS-66HDCP 6 x 6 DVI Matrix Switcher 9
7 Operating the VS-66HDCP 6 x 6 DVI Matrix Switcher 10
7.1 Routing Inputs to Outputs 11
7.2 Disconnecting the Outputs 11
7.3 Storing and Recalling a Setup 11
7.4 Acquiring the EDID 12
7.4.1 Acquiring an EDID from a Single Connected Output 12
7.4.2 Acquiring an EDID from Several Sets of Inputs and Outputs 12
7.4.3 Acquiring an EDID from Several Connected Outputs Automatically 13
7.4.4 Acquiring the Default EDID 14
7.5 Connecting to the VS-66HDCP via RS-232 14
7.6 Operating via the ETHERNET 14
7.6.1 Connecting the ETHERNET Port directly to a PC (Crossover Cable) 14
7.6.2 Connecting the ETHERNET Port via a Network Hub (Straight-Through Cable) 16
7.6.3 Control Configuration via the Ethernet Port 16
8 Technical Specifications 16
9 Default Communication Parameters 17
10 Hex Table 17
11 Kramer Protocol 2000 18
Figures
Figure 1: VS-66HDCP 6 x 6 DVI Matrix Switcher Front and Rear Views 5
Figure 2: Connecting the VS-66HDCP 6 x 6 DVI Matrix Switcher
10
Figure 3: SELECTOR Buttons 11
Figure 4: Local Area Connection Properties Window
15
Figure 5: Internet Protocol (TCP/IP) Properties Window
15