Filter
Top Products
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your VS-66HDCP
6
Table 1: VS-66HDCP 6 x 6 DVI Matrix Switcher Front Panel Features
#
Feature
Function
1 IR Receiver LED The red LED is illuminated when receiving signals from the Infrared
remote control transmitter
2 POWER Switch Illuminated switch for turning the unit ON or OFF
3 ALL Button Use ALL to select all inputs or all outputs (see section 7.1)
4 OFF Button Use OFF to disconnect one or all outputs (see section 7.2)
5 SELECT IN Buttons Press an INPUT selector button to select an input (from 1 to 6)
6 SELECT OUT Buttons Press an OUTPUT selector button to select an output (from 1 to 6)
7 STO Button Press to store an input setup
8 RCL Button Press to recall an input setup
9 LOCK Button Press to toggle disengaging the front panel buttons and to acquire the
EDID (see section
7.1)
10 EDID Button
1
Press to acquire the EDID
11 7-segment Display Displays the selected audio or video input switched to the output
(marked above each input)
Table 2: VS-66HDCP 6 x 6 DVI Matrix Switcher Rear Panel Features
#
Feature
Function
12 INPUT DVI Connectors Connect to the DVI sources (from 1 to 6)
13 OUTPUT DVI Connectors Connect to the DVI acceptors (from 1 to 6)
14 RS-232 DB-9F Port Connects to the PC or the RS-232 Remote Controller
15 ETHERNET Connector Connects to the PC or other Ethernet Controller
16 RESET Button Press the reset button to reset to the ETHERNET factory default
definitions
2
17
:
IP number − 192.168.1.39
Mask – 255.255.255.0
Gateway – 192.168.1.1
REMOTE IR
3.5mm Connector
Connect to an external IR receiver unit for controlling the machine via
an IR remote controller (instead of using the front panel IR receiver)
18 Power Connector with Fuse AC connector enabling power supply to the unit
1 Illuminates when configuring the EDID
2 First disconnect the power cord and then connect it again while pressing the RESET button. The unit will power up and load
its memory with the factory default definitions