Filter
Top Products
-36-
4. VLAN Lookup
Syntax:
VLAN Lookup <vidlist>
Description:
Lookup VLAN entry and show port list.
<vidlist> : VLAN ID list.
5. VLAN EgressTagging
Syntax:
VLAN EgressTagging [<portlist>] [enable|disable]
Description:
Set or show the VLAN Egress Tagging mode for the port. The enabled ports
will strip the VLAN tag from received frames and insert the tag in trans-
mitted frames (except PVID). The disabled ports will not strip the tag
from received frames or insert the tag in transmitted frames.
[<portlist>]: Port list (default: All ports).
[enable|disable]: Enable/disable VLAN egress tagging (default: Show
awareness).
6. VLAN PVID
Syntax:
VLAN PVID [<portlist>] [<vid>|none]
Description:
Set or show the port VLAN ID. Untagged frames received on the port will
be classified to this VLAN ID. Frames classified to this VLAN ID will be
sent untagged on the port.
[<portlist>]: Port list (default: All ports).
[<vid>|none]: Port VLAN ID, 1-4094 (default: Show PVID).
The none option can be used for trunk links.
7. VLAN Frame Type
Syntax:
VLAN Frame Type [<portlist>] [all|tagged]
Description:
Set or show the accepted frame type for the port.
[<portlist>]: Port list (default: All ports).
[all|tagged]: Accept all or only tagged (default: Show frame type).
7.7.6 Aggregation/trunking Commands
Commands at Aggr level:
Aggr Configuration
Aggr Add <portlist>
Aggr Delete <portlist>
Aggr Lookup <portlist>
Aggr Mode [smac|dmac|xor]
1. Aggregation Configuration
Syntax: