-9-
Port LED summary table
LEDs Status Interpretation
10/100M Steady /Blinking Amber Connected as 10Mbps/Active
Steady/Blinking green Connected as 100Mbps/Active
1000M Steady/Blinking green Connected as 1000Mbps/Active
If the port is connected but the Port LED is dark, check the following items:
• The switch and the connected device power are on or not.
• The connecting cable is good and with correct type
• The cable is firmly seated in its connectors in the switch and in the associated device
• The connecting device, including any network adapter is well installed and functioning
2.4 The Rear Panel
The rear panel of the switch is shown as below: