Filter
Top Products
-6-
3. Making Network Connections
Two Switched Ports
Two switched ports are located on the front panel.
Configuration Switches
On rear panel, Port 1 and Port 2 have individual configuration switches
as shown below:
Port 1, Port 2 SW1 Off Auto-negotiation is enabled.
On Auto-negotiation is disabled.
Port 1, Port 2 SW2 Off 100Mbps is used. (When SW1 = On)
On 10Mbps is used. (When SW1 = On)
Port 1, Port 2 SW3 Off Full-duplex is used. (When SW1 = On)
On Half-duplex is used. (When SW1 = On)
Port 2 only SW4 Off Fiber connector is disabled.
On Fiber connector is enabled.
Factory Defaults
SW1 Off Auto-negotiation is enabled.
SW2 Off 100Mbps
SW3 Off Full-duplex
SW4 On Fiber connector is enabled.