Filter
Top Products
2.3 Front Panel and Rear Panel
Figure 2-4 Components on the Front and Rear Panel
• Eight 10BASE-T switched ports (Port #1 to Port #8)
Each port consists of an RJ-45 connector and is used for connec-
tion to a 10BASE-T hub or node.
• One 10/100BASE-TX switched port (Port #9)
The port consists of an RJ-45 connector and is used for connection
to a 10BASE-T or 100BASE-TX device (hub or node).
• Crossover switches for Port #8 and Port #9
Each crossover switch is provided for configuring the pin assign-
ments of the associated RJ-45 connector.
• One expansion port slot (Port #10)
The port slot can accommodate one optional port module. Two
types of port modules can be selected. One is a 10/100BASE-TX
port module and the other is a 100BASE-FX port module. Refer to
section 2.4 for how to install the module into the slot.
6