Filter
Top Products
3.3 10/100BASE-TX Switched Ports
This section applies to the 10/100BASE-TX Port #9 and expansion slot
Port #10 pre-configured with a 10/100BASE-TX port module. Use the
crossover switch to set the type of RJ-45 connector as follows:
The following table lists the devices to which the ports can connect:
Device connected Crossover SW Cable used
Computer 10BASE-T port X setting Cat. 3, 5 straight UTP
10BASE-T hub port (I type) X setting Cat. 3, 5 straight UTP
10BASE-T hub port (X type) I setting Cat. 3, 5 straight UTP
10BASE-T switched port (I type) X setting Cat. 3, 5 straight UTP
10BASE-T switched port (X type) I setting Cat. 3, 5 straight UTP
100BASE-TX hub port (I type) X setting Cat. 5 straight UTP
100BASE-TX hub port (X type) I setting Cat. 5 straight UTP
100BASE-TX switched port (I type) X setting Cat. 5 straight UTP
100BASE-TX switched port (X type) I setting Cat. 5 straight UTP
Cable Type and Maximum Length
Connection UTP Cable Category Maximum length
10BASE-T (10Mbps) Cat. 3, 5 100 meters
100BASE-TX (100Mbps) Cat. 5 100 meters
14