Filter
Top Products
• Diagnostic LED indicators
The indicators provide the operating status of the hub and the
network ports. The status includes power, partition, duplex,
activity, and collision.
• Configuration switches
Two configuration switch groups are located on the rear of the switch
unit. The switches are used for configuring the operation settings for all
ports. The settings include mode, speed, and duplex.
2.4 Installing an Optional Port Module
Two types of port modules can be selected for the expansion port slot:
10/100BASE-TX port module
This module comes with one RJ-45 connector and one crossover switch
on the front. It can support either one 10BASE-T connection or one
100BASE-TX connection. For dual-speed support, the module features
the capability of speed auto-sensing.
Figure 2-5 10/100BASE-TX Port Module
100BASE-FX port module
This 100Mbps-based module complies with 100BASE-FX standard and
comes with two ST connectors. It can support one fiber cable segment
to a Fast Ethernet network.
7