Filter
Top Products
Basic Operation
3-5
Adjusting Exposure
Adjust the exposure automatically or manually. [Manual] is selected as the default setting mode.
When selecting [Manual], follow the steps as below.
1
Place the originals in the document processor or on the platen.
2
Press the exposure adjustment key
( / ) to adjust the exposure level.
To use the automatic exposure mode,
press [Auto]. The copier determines a
suitable exposure level for copying.
To change the exposure mode from
[Auto] to [Manual], press the exposure
adjustment key ( / ).
3
Press the Start key to start copying.
NOTE: By pressing [Exposure], the Exposure Mode
screen will be displayed. You can also adjust the
exposure from this screen.
You can increase or decrease the exposure of the
auto exposure mode. Refer to Chapter 3 of the
Advanced Operation Guide.
You can fix the default setting mode in the auto
exposure mode. Refer to Chapter 3 of the Advanced
Operation Guide.
You can choose the adjustment level from 7 or 13.
Refer to Chapter 3 of the Advanced Operation Guide.
Ready to copy.
11x8
½
Paper Size
ProgramFunctionUser choice
Basic
11x8½"
Plain
11x8½"
Recycled
11x17"
Plain
8½x11"
Plain
11x8½"
Plain
MP tray
Plain
APS Auto %
Reduce
100%
Exposure
Auto
Staple
Staple
Left Top
Staple Off
100%
/Enlarge Mode
Exposure
/Punch