Filter
Top Products
Setup
6 NETWORK SCANNER SETUP GUIDE
Registering the Subnet Mask
1 Press S or T to select Subnet Mask.
2 Press Enter.
3 Use the numeric keys to enter each segment of the Subnet Mask in turn,
pressing
X or [*.] to move between segments.
If you make an error in entering a portion of the Subnet Mask, press
W to
return to the previous block of digits and re-enter the correct number.
4 Press Enter on completion.
5 Register the Default Gateway - refer to Registering the Default Gateway on
page 6.
Registering the Default Gateway
1 Press S or T to select Default Gateway.
2 Press Enter.
3 Use the numeric keys to enter each segment of the Default Gateway in turn,
pressing
X or [*.] to move between segments.
If you make an error in entering a portion of the Default Gateway, press
W
to return to the previous block of digits and re-enter the correct number.
4 Press Enter on completion.
5 When you have changed all the network settings, press right Select. The
message display returns to the basic screen.