Filter
Top Products
OPERATION GUIDE xv
EN ISO 7779
Maschinenlärminformations-Verordnung 3. GPSGV, der höchste
Schalldruckpegel beträgt 70 dB (A) oder weniger gemäß EN ISO 7779.
Disclaimer
Kyocera Mita will not be liable to customers or any other person or entity
for any loss or damage caused or alleged to be caused directly or indirectly
by equipment sold or furnished by us, including but not limited to, any
interruption of service, loss of business or anticipatory profits, or
consequential damages resulting from the use or operation of the
equipment or software.
Energy Saving Control Function
This printer comes equipped with a Low Power Mode where printer
function remains in a waiting state but energy consumption is still reduced
after a certain amount of time elapses since the printer was last used, as
well as a Sleep Mode where printer function remains in a waiting state but
power consumption is still reduced to a minimum when there is no activity
with the printer within a set amount of time.
Low Power Mode
This printer automatically enters Low Power Mode when approximately 9
minutes have passed since the printer was last used.
Sleep Mode
This printer automatically enters Sleep Mode when approximately 15
minutes (in U.S.A./Canada) or 20 minutes (in European countries) have
passed since the printer was last used. The amount of time of no activity
that must pass before Sleep Mode is activated may be lengthened.
Duplex Printing
This printer includes duplex printing as a standard function. For example,
by printing two single-sided originals onto a single sheet of paper as a
duplex printing, it is possible to lower the amount of paper used.
Recycled Paper
This printer supports recycled paper which reduces the load on the
environment. Your sales or service representative can provide information
about recommended paper types.