99
Troubleshooting
Load the tray with paper of the specified type, and then change the paper type setting for the tray on the control
panel. Alternately, press the [Form Feed] key, select a tray containing paper of the specified type, and then print.
To cancel the print job, press the [Job Reset] key.
See p.103 "
Paper Size Mismatch/Paper Type Mismatch (Tray 1)", p.105 "Paper Size Mismatch/Paper Type
Mismatch (Bypass Tray)".
Maintenance in process...
The printer is cleaning or flushing its print head. Wait a moment.
Right Front Cover is open/Close Right Front Cover
The right front cover is open. Close the print cartridge cover.
See p.110 "
Cover Open / Print Cartridge(s) Not Detected".
Remove Misfeed Tray 1
Paper has jammed in Tray 1. Clear the jam.
See p.82 "
Removing Paper Jammed in the Paper Tray (Tray 1)".
Remove Misfeed Bypass
Paper has jammed in the bypass tray. Clear the jam.
See p.83 "
Removing Paper Jammed in the Bypass Tray (optional)".
Remove Misfeed Guide Board
Paper has jammed in the Guide Board. Clear the jam.
See p.87 "
Removing Paper Jammed around the Guide Board".
Remove Misfeed Top Cover
Paper has jammed under the top cover. Clear the jam.
See p.86 "
Removing Paper Jammed under the Top Cover".
Remove Misfeed Duplex
Paper has jammed in the duplex unit. Clear the jam.
See p.89 "
Removing Paper Jammed in the Duplex Unit".
Remove Misfeed Ouput
Paper has jammed in the output tray. Clear the jam.
See p.90 "
Removing Paper Jammed in the Output Tray".
Close Duplex Unit Cover
The duplex unit cover is open. Close the duplex unit cover.
See p.108 "
Cover Open".
Reset Duplex Unit correctly/Reset Duplex Unit correctly
The duplex unit has not been installed correctly. Reset the duplex unit correctly.
See p.109 "
Duplex Unit Not Detected".
z
If this does not eliminate the problem, contact your service representative.