Filter
Top Products
Operating Instructions Client Reference
125
B Change the Lana Number. Click the [Services] tab, click “NetBIOS Interface” in the [Network
Services:] box, and click [Properties].
C Click the Lana Number corresponding to the Nbf protocol of the [Network Route] headline, and
click [Edit].
D Type “0” as the Lana Number.
Note
❒ If another protocol’s Lana Number is configured at “0”, change it to another number other than
“0”.
E Click [OK].
F Click [Close], and close the [Network] dialog box.
G After confirming the message to restart, click [Yes].
Note
❒ After you change the Lana Number, you must restart the computer.