Filter
Top Products
3: Command Line Interface
EDS-MD Command Reference 12
An overview of the levels in the EDS-MD is presented in Figure 3-2 CLI Level Hierarchy below.
Figure 3-2 CLI Level Hierarchy
Commands at the login level (see Figure 3-3 Login Level Commands below) do not affect current
configuration settings and are not displayed initially. If you type ?, you will see the login sub-
commands. These commands provide diagnostic and status information only.
Figure 3-3 Login Level Commands
>?
clrscrn exit
ping <host> ping <host> <count>
ping <host> <count> <timeout> show
show history show lines
trace route <host> trace route <host> <method>
enable
>
Note: To configure the EDS-MD4/8/16, you must be in the enable level and any of its
sub-levels. Figure 3-4 below shows the enable level commands.
(login)
enable
ssl
ethernet
link
query port
smtp
line <line>
filesystem
configure
device
ssh
telnet
rss
dns
email
<number>
ssh
arp
diagnostics
ftp
host
<number>
http
ip
rtc
terminal
network
syslog
terminal
<line>
tunnel
<line>
xml
client
server
credentials
trusted
authorities
accept
connect
disconnect
modem
packing
serial
icmp
cli
If 1
vip
log