Lantronix EDS-MD16 Switch User Manual


 
5: Commands and Levels
EDS-MD Command Reference 289
if 1 (config-if:eth0) level commands
bootp disable
Disables BOOTP.
bootp enable
Enables BOOTP.
clrscrn
Clears the screen.
default gateway <IP address>
Sets the configurable gateway IP address to the default value.
default mtu
Restores the default Maximum Transmission Unit (MTU) size.
dhcp client id <text>
Sets the DHCP client id.
dhcp disable
Disables DHCP.
dhcp enable
Enables DHCP.
domain <text>
Sets the domain name.
<text> = name of the domain.
exit
Exits to the config level.
hostname <text>
Sets the host name.
<text> = name of the host.
ip address <ip address/cidr>
Sets the IP address and network mask.
Formats accepted:
192.168.1.1 (default mask)
192.168.1.1/24 (CIDR)
"192.168.1.1 255.255.255.0" (explicit mask)
link
Enter link configuration level
mtu <bytes>
Sets the Maximum Transmission Unit (MTU) size.
no default gateway
Clears the default gateway.
no dhcp client id
Clears the DHCP client ID.
no domain
Clears the domain name.
no hostname
Clears the host name.
no ip address
Clears the IP address.
no primary dns
Clears the name of the primary DNS server.
no secondary dns
Clears the name of the secondary DNS server.
primary dns <IP address>
Sets the IP address of the primary DNS server.
secondary dns <IP address>
Sets the IP address of the secondary DNS server.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current CLI
session.
show status
Show interface status
write
Stores the current configuration in permanent memory.
ip (config-ip) level commands
clrscrn
Clears the screen.
default ip time to live
Restores the default IP time to live.
default multicast time to live
Restores the default IP multicast time to live, which is one hop.
exit
Exits to the configuration level.
ip time to live <hops>
Sets the IP time to live, known by SNMP as "ipDefaultTTL".
<hops> = number of hops that a typical IP packet is allowed to
live.
multicast time to live <hops>
Sets the IP multicast time to live.
<hops> = number of hops that a multicast IP packet is allowed
to live.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current CLI