Lathem 1000E Time Clock User Manual


 
19
SETTING THE PASSWORD
REGISTERING THE PASSWORD
Example: Set the password "1234".
Press the SELECT button and position the
" " mark at the "PASSWORD".
At that moment, first two digits flash. (The
flashing means it can be changed.)
In case of the example, press the CHANGE
button to set at "12". And then press the
SET button.
At that moment, the flashing changes to
last two digits.
Step 1
PASSWORD
SELECT CHANGE
SET
PASSWORD
SELECT CHANGE
SET
PASSWORD
SELECT CHANGE
SET
In case of the example, press the CHANGE
button to set at "34". And then press the
SET button.
Step 2
TU WE TH FR SA SUMO
After you finish registering the password,
press the SET button once again.
Now the password registering has been
completed. Replace the cover and lock.
IMPORTANT: If you do not complete
Step 3, the clock will not print.
Step 3
SELECT CHANGE SET
When the password is set, you are asked to enter it. If the password you entered does not
coincide with the setting, you cannot change the setting values.
You may set a password by any 4-digit number from 0001 to 9998.
Note a number "0000" and "9999" cannot be used as a password.