Filter
Top Products
Once the AC line cord is plugged into the outlet, the recorder can be used immediately. Basic
operations, including the time and dates are preset.
It is easy to operate the unit. The time card is automatically pulled in, printed and then
ejected.
Do not let any metallic object get into the slot including paper clips. Do not
forcefully push in a card, either. These may cause the unit to malfunction.
4. DAILY OPERATIONS
The number of cards that can be automatically registered is a maximum of 50 cards.
When a new card is inserted, the card will automatically be registered, and will print the
"IN" print on the first line. The month will be printed on the first line also or on the line
when the month and printing line change.
You can print "IN" and "OUT" as many times as you want per day. Concerning the printing
line, it will slide one line down each time you insert the card for "IN" print.
You can choose 3 functions for the buttons. You must set these modes before inserting any
card in order for it to be valid.
Refer to "3.BEFORE USING TIME RECORDER".
11
When the card that you are using becomes full, it will show "END" on the display. When
the "END" appears, you can use the "Card reassign" mode to transfer the card and have a
new card take over from the old one.
When you want to reset the card (clear the accumulated totals) manually, you can use the
"Card reset" mode to reset a sigle card or use the "All cards reset " mode to reset all the
cards in memory. It is not necessary to routinely reset cards manually, since the clock does
this automatically each pay period (unless using Job Cost Mode ).
Refer to "Functions for the buttons".
Refer to "Card reassign".
Refer to "Card reset" and "All cards reset".
8