To prepare for setting:
1
Unlock the cover.
2
Hold the sides of the cover with both
hands, and lift it.
3
Make settings using the control button
while watching the display.
Please refer to the following page for
the details of each setting.
4
After the setting has been completed,
fit the plugs at the lower sides of the
cover into the holes of the unit.
5
Pull back the cover while returning
it from your side to the opposite
side to install it.
Key hole
Make sure the power is on before
making setting.
Control
button
Display
6. SETTING
Preparation for setting
Plug
Hole
19
16