• Not be a common word or a common name
• Be signicantly different from your previous passwords
Setting, changing, or deleting a password
This section provides instructions on how to set, change, or delete a password.
To set, change, or delete a password, do the following:
1. Start the Setup Utility program. See “Starting the Setup Utility program” on page 70.
2. From the Setup Utility program main menu, select Security ➙ Change Supervisor Password or
Change User Password.
3. Follow the instructions on the screen to set, change, or delete a password.
Note: A password can be any combination of up to 6 (1 to 6) alphabetic and numeric characters. For
more information, see “Password considerations” on page 77.
RAID controllers
The following table lists the various utilities available to congure RAID controllers before an operating
system is installed.
Table 26. RAID utilities
RAID utilities Description Location Where to nd more information
EasyStartup
• For use with all
factory-supported RAID
controllers
• Automatically detects
hardware and lists
all supported RAID
congurations
• Congures one disk array
per controller using all drives
currently attached to the
controller
• Created a RAID response le
that can be used to congure
RAID controllers on similarly
congured Lenovo servers.
ThinkServer
EasyStartup DVD
“Using the ThinkServer
EasyStartup program” on
page 79
LSI IR-RAID Utility Onboard 1068E SAS RAID
adapter
Press Ctrl+C to start “Onboard 1068E SAS RAID
controller Conguration Utility
program” on page 81
LSI MegaRAID
WebBIOS
Conguration Utility
ThinkServer 8708ELP SAS
RAID adapter or 8708EM2 RAID
adapter
Press Ctrl+H to start Refer to the MegaRAID SAS
Software User Guide on the
documentation DVD that came
with you server. And you can
nd and install the MegaCLI
program and the MegaRAID
Storage Manager program in the
ThinkServer EasyStartup DVD
that came with your server. Insert
the DVD into the optical drive
and the les are in the \Tools And
Utilities directory.
78 ThinkServer Installation and User Guide