Filter
Top Products
Table 28. Items on the Global Properties window
Item Description
Pause When Boot Alert Displayed Indicates stop the boot or not when the alert occurs
during the boot. The current property can be changed
by pressing + or -. The option No indicates that you can
continue to boot when the alert occurs. The option Yes
indicates that you can pause boot when the alert occurs
and press any key to continue.
Boot Information Display Mode
Denes how much BIOS information to be displayed
during the boot. The current property can be changed by
pressing + or -.
Support Interrupt
Indicates the supported interrupt mode. Hook interrupt,
the Default is the default value, which supports the boot
from CD-ROM in the oppy emulation mode.
Restore Defaults Restores the defaults.
Accessing the Adapter Properties window
In the Adapter List window, select C1068E and press Enter. The Adapter Properties window for SAS1068E
opens.
Table 29. Items in the Adapter Properties window for SAS1068E
Item Description
Adapter
Detected SAS adapter.
PCI Slot The PCI slot number assigned for the adapter.
PCI Address (Bus/Dev) The PCI Device/Function assigned for the adapter.
MPT Firmware Revision Indicates the current Firmware version.
SAS Address Indicates the current SAS address.
Status
Indicates that the adapter in the boot list is enabled or
disabled.
Boot Order
Indicates the boot sequence.
Boot Support Set the software controlling mode of the controller. The
Enabled BIOS & OS means that the adapter is controlled
by both the BIOS and the driver in the operating system.
The Enabled BIOS Only means that the adapter is
controlled only by the BIOS, instead of the driver in the
operating system. This option might not be supported by
all the operation systems, such as Windows operating
systems. The Enabled OS Only means that the adapter
is controlled only by the operating system. The Disabled
means that the adapter is disabled.
RAID Properties
Set the Host RAID. See “SAS RAID settings” on page 83.
SAS Topology Set the SAS hard disk drives. See “Accessing the SAS
Topology window” on page 84.
Advanced Adapter Properties
Set the advanced properties of the adapter.
Note: To make any of the settings take effect, you need to restart the server.
82 ThinkServer Installation and User Guide