Filter
Top Products
4. Disconnect the rear fan cable from the system fan connector on the system board. See “Locating
parts on the system board” on page 12.
5. The rear fan is attached to the chassis by four rubber mounts. Remove the rear fan by breaking or
cutting the rubber mounts and gently pulling the rear fan out of the chassis.
Note: The new rear fan will have four new rubber mounts attached.
Figure 43. Removing the rear fan
6. Install the new rear fan by aligning the new rubber mounts with the corresponding holes in the chassis
and push the rubber mounts through the holes.
56 ThinkCentre User Guide