Filter
Top Products
Diagnostic Error Code FRU/Action
000-000-XXX BIOS Test Passed
No action
000-002-XXX BIOS Timeout 1. Flash the system. See “Updating (ashing) the BIOS
from a disc” on page 180.
2. System board
000-024-XXX BIOS Addressing test failure 1. Flash the system. See “Updating (ashing) the BIOS
from a disc” on page 180
.
2. System board
000-025-XXX BIOS Checksum Value error 1. Flash the system. See “Updating (ashing) the BIOS
from a disc” on page 180
.
2. System board
000-026-XXX FLASH data error 1. Flash the system. See “Updating (ashing) the BIOS
from a disc” on page 180.
2. System board
000-027-XXX BIOS Conguration/Setup error 1. Run the Setup Utility program.
2. Flash the system. See “Updating (ashing) the BIOS
from a disc” on page 180.
3. System board
000-034-XXX BIOS Buffer Allocation failure
1. Reboot the system.
2. Flash the system. See “Updating (ashing) the BIOS
from a disc” on page 180.
3. Run memory test
4. System board
000-035-XXX BIOS Reset Condition detected 1. Flash the system. See “Updating (ashing) the BIOS
from a disc” on page 180
.
2. System board
000-036-XXX BIOS Register error 1. Flash the system. See “Updating (ashing) the BIOS
from a disc” on page 180.
2. System board
000-038-XXX BIOS Extension failure 1. Flash the system. See “Updating (ashing) the BIOS
from a disc” on page 180
.
2. Adapter card
3. System board
000-039-XXX BIOS DMI data error 1. Flash the system. See “Updating (ashing) the BIOS
from a disc” on page 180.
2. System board
000-195-XXX BIOS Test aborted by user
Information only Restart the test, if necessary.
000-196-XXX BIOS test halt, error threshold exceeded
1. Press F3 to review the log le.
2. Restart the test to reset the log le.
000-197-XXX BIOS test warning
1. Make sure the component that is called out is
connected and/or enabled. See Chapter 6 “Using the
Setup Utility program” on page 41
.
2. Re-run test.
3. Replace the component that is called out in warning
statement.
4. Replace the component under test.
48 ThinkCentre Hardware Maintenance Manual