Filter
Top Products
5. Press the blue release button and slide the optical drive out the front of the computer.
Figure 13. Removing the optical drive
6. Install the optical drive retainer 1 on the side of the new optical drive.
Figure 14. Installing the retainer on the optical drive
7. Slide the new optical drive into the drive bay until it snaps into position.
Figure 15. Installing the optical drive
8. Connect the signal cable and the power cable to the new optical drive.
9. Reinstall the front bezel. See “Removing and reinstalling the front bezel” on page 73.
10. Go to “Completing the parts replacement” on page 98.
Chapter 8. Replacing FRUs 79