Filter
Top Products
Table 32. Removal steps of LCD panel
1
Attention: Unplug the LCD cable with holding the left and right edges of the
connector with your fingers, and gently pull the connector toward you. DO NOT
unplug it with pulling the cable. Applying tension could cause the cable to be
damaged or a wire to be broken.
When installing:
v Place the LCD panel on a soft and clean sheet spread on a flat table, and plug
the cable by pushing the left and right edges of the connector little by little
with your fingers.
v DO NOT work by lifting the LCD panel.
v DO NOT plug the cable with one hand.
2
132 ThinkPad T400s Hardware Maintenance Manual