Filter
Top Products
Figure 63. Removing the front bezel
3. Pivot the drive bay assembly upward to gain access to the internal speaker. See “Accessing the system
board components and drives” on page 108
.
4. Locate the internal speaker. See “Locating components” on page 109.
5. Disconnect the internal speaker cable and the thermal sensor cable from the internal speaker connector
and the thermal sensor connector on the system board. See “Locating parts on the system board” on
page 110
.
6. Push the four tabs 1 on the bottom of the internal speaker 2 one by one as shown to release the
internal speaker, and then lift the internal speaker straight up to completely remove it from the chassis.
128 ThinkCentre Hardware Maintenance Manual