Filter
Top Products
• “1040 Keyboard” on page 77
• “1050 Palm rest or palm rest with ngerprint reader” on page 80
Table 18. Removal steps of keyboard bezel
1
Step Screw (quantity) Color
Torque
1
M2 × 5 mm, wafer-head, nylon-coated (1)
Black 0.181 Nm
(1.85 kgf-cm)
In step 2 , detach the claws. Then remove the keyboard bezel in the direction shown by arrow 3 .
Attention: When you service the keyboard bezel, avoid any kind of rough handling.
2
2
2
2
3
3
When installing:
Make sure that all the claws are attached rmly.
1110 Monaural speaker assembly (for X200, X200s, X201s, and X201si)
For access, remove these FRUs in order:
• “1010 Battery pack” on page 71
• “1040 Keyboard” on page 77
• “1050 Palm rest or palm rest with ngerprint reader” on page 80
Chapter 8. Removing and replacing a FRU 89