Filter
Top Products
Replacing the hard disk drive
Attention:
Do not open your computer or attempt any repair before reading and understanding the “Important safety information”
on page v
.
This section provides instructions on how to replace the hard disk drive.
To replace the hard disk drive, do the following:
1. Turn off the computer and disconnect all power cords from electrical outlets.
2. Remove the computer cover. See “Removing the computer cover” on page 32.
3. Remove the front bezel. See “Removing and reinstalling the front bezel” on page 32.
4. Note the location of the four screws 1 that secure the hard disk drive. Then, pivot the drive bay
assembly upward.
Figure20. Pivoting the drive bay assembly
40 ThinkCentre User Guide