Lenovo 3836 Server User Manual


 
5. Touch the static-protective package that contains the new DVD drive to any
unpainted metal surface on the server; then, remove the DVD drive from the
package and place it on a static-protective surface.
6. Follow the instructions that come with the drive to set jumpers or switches, if
there are any.
Note: You might find it easier to install the new drive from the front and then
attach the cables.
7. Align the holes on the blue optical drive rails with the pins on the side of the
drive and snap the optical drive rails onto the drive. Align the rails on the DVD
drive with the guides on the drive bay and slide the drive into the drive bay
until it locks into place.
1 EMC shield
2 Optical drive
3 Optical drive rails
8. Reconnect the power and signal cables to the drive.
9. Make sure that the signal cable is routed through the plastic slot on the bottom
of the chassis underneath the fan cage assembly so that it does not block the
airflow to the rear of the drives as shown in the following illustration:
64 ThinkServer TD200 Types 3724, 3808, 3809, 3815, 3817, 3824, 3826, 3836: Installation and User Guide