Filter
Top Products
Figure16. 2.5-inch hot-swap hard disk drive status LEDs
1 Hard disk drive activity LED 2 Hard disk drive RAID status LED Description
Off Off
The hard disk drive has failed or is
not present.
On, green Off
The hard disk drive is present but not
in use.
Blinking, green
Off
The hard disk drive is active and data
is being transferred.
On, green Blinking rapidly (about four ashes
per second), amber
The RAID controller is identifying the
hard disk drive.
On, green On, amber
The RAID array has failed and cannot
recover. You need to recreate a new
array.
Blinking, green
Blinking slowly (about one ash per
second), amber
The hard disk drive is being rebuilt.
RAID card
This topic provides information to help you locate the connectors on a RAID card if you have one installed in
the PCI-E slot 3 on the system board. See “System board components” on page 42
.
Chapter 3. Product overview 33