Filter
Top Products
Security menu items
Menu item
Selections Comments
Set Administrator Password Set an administrator password
to protect against unauthorized
access to your server. See “Using
passwords” on page 65
.
Set User Password Set a user password to protect
against unauthorized access to your
server. See “Using passwords” on
page 65
. This item is only available
after you have set an administrator
password.
Power/Reset Button Lockout
• Disabled
• Enabled
If this item is set to Enabled, the
power switch on the front panel will
be locked and the server can only be
turned on remotely.
BIOS Write Protect
• Disabled
• Enabled
If you want to update or ash the
BIOS, make sure that this item is
set to Disabled. If this item is set to
Enabled, the BIOS will be protected
from updating or ashing.
TPM Support
• Disabled
• Enabled
Enable or disable the TPM support.
To use the TPM feature, you need to
have a TPM module installed in the
TPM connector on the system board.
TPM State
• Disabled
• Enabled
This item is displayed when the TPM
Support is set to Enabled. Set the
TPM State to enable or disable the
TPM function. The server will restart
in order to change the state of TPM.
Server Management menu
This topic provides information about the features available on the Server Management menu in the
Setup Utility program.
You can view system information and view or change event log settings on the Server Management menu.
The following table shows the contents of the Server Management menu. On each submenu, press the
Enter key to view the information or show selectable options and select a desired option by using up and
down arrow keys. Some items are displayed on the menu only if the server supports the corresponding
features.
Note: Default values are in boldface in the Selections column.
Chapter 5. Conguring the server 61