Filter
Top Products
Step 5. Completing the hardware installation
1. Be sure that the CD-RW/DVD-ROM Combination Drive is securely mounted
and that the connectors are firmly attached.
2. Be sure that the cables do not interfere with the computer cover and that they
do not block the power-supply fan blades or airflow paths.
3. Reinstall the computer cover.
4. Reconnect all external devices.
5. Plug all power cords into the electrical outlets.
Step 6. Updating your computer configuration
After you have completed the hardware installation, restart your computer.
Usually, the configuration-setup information screen is displayed when you turn on
your computer. If you do not see this screen, check your computer documentation
for information about accessing the configuration or setup utility program.
To see the configuration information for most Lenovo computers, press F1 during
startup when the Lenovo graphic is displayed in the upper-right corner of the
screen. When you have finished reviewing the information, save the changes and
exit.
Care and maintenance
This section includes information on taking care of your CD-RW/DVD-ROM
Combination Drive and the CDs and DVDs that you use with the drive.
CD safety information
Carefully handle and clean discs, especially writable media types such as CD-R
and CD-RW discs, so that they remain readable. You can prolong the life of your
discs by using the following precautions:
v Always store discs in their original packaging
v Always store discs out of direct sunlight
v Always store discs away from direct heat sources
v Remove discs from the computer when not in use
v Check disc for cracks BEFORE each use
v DO NOT force discs into the computer/packaging
v DO NOT bend or flex discs
Caring for a CD or DVD
Digital discs are high-density media that must be handled with care and kept clean
to ensure that they remain readable. The following precautions help to prolong the
life of your discs.
Attention: Wiping a disc using a circular motion can damage the disc and cause
data loss.
v Handle the disc by the edges or the center hole. Do not touch the surface of the
disc.
v To remove dust or fingerprints, wipe the disc from the center to the edge with a
soft, lint-free cloth.
v Do not write on the surface.
v Do not place the disc in direct sunlight.
v Do not use commercial cleaners to clean the disc.
Installation and user’s guide 1-5