Filter
Top Products
5. Disable the Windows Auto Insert Notify function on your CD-ROM and
CD-RW drives.
You
cannot eject a CD or DVD disc.
Take the following actions after ensuring that the drive is not in the process of
writing to a disc:
1. Eject the CD through software.
2. Use the Eject button.
3. Turn off the computer. Wait 45 seconds; then turn on the computer and try
using the Eject button again.
4. If other methods do not work, use the manual-eject hole, using instructions
given in “Manually ejecting a disc” on page 8.
You
cannot read from the CD or DVD disc after successfully writing to it.
Take the following actions:
1. If you can read the CD or DVD Disc in another CD or DVD player or you can
see previous sessions, the directory information might be damaged on the
volume, making it unreadable. To get ideas for troubleshooting, check the
documentation that comes with the software.
2. You might have a damaged CD-R, CD-RW, DVD-R, DVD-RW, or DVD-RAM
disc. Try a new disc or another brand of CD or DVD disc.
3. If you can read from a CD-RW, DVD-RW, or DVD-RAM disc in the writing
drive, but not in another MR drive, be sure that a UDF Reader program is
installed in the computer.
4. Avoid writing at the slower 1X speed unless required by your computer.
Chapter 2. Using the Multi-Burner Plus drive 15