Filter
Top Products
To replace the secondary hard disk drive, do the following:
1. Remove the computer cover. See “Removing the computer cover” on page 14.
2. Locate the secondary hard disk drive. See “Locating internal drives” on page
11.
3. Disconnect the signal cable and the power cable from the hard disk drive.
4. Press the blue release button to release the hard disk drive cage and then lift
the hard disk drive cage out of the chassis.
5. Pull on the blue handle to release and remove the hard disk drive from the
hard disk drive cage.
6. Flex the sides of the blue bracket to remove the hard disk drive from the
bracket.
Figure 23. Removing the secondary hard disk drive
30 User Guide