Filter
Top Products
memory fan cable from the system board, remove the blue shipping clip, press
inward on the two tabs 1, pivot the fan duct, and then disengage the rear of
the fan duct.
Note: Not all computer models have the memory fan duct and blue shipping
clip.
7. Open the retaining clips as shown.
If you are replacing an old memory module, open the retaining clips and
gently pull the memory module out of the memory slot.
Figure 11. Removing the memory fan duct
Figure 12. Opening the retaining clips
Figure 13. Removing a memory module
Chapter 2. Installing or replacing hardware 19